GM-6A Multifunctional Engineering Drilling Rig
Description:
GM-6A Multifunctional Engineering Drilling Rig is a new model
developed by our factory according to the market demand of
engineering, mainly applicable to rotary drilling, auger drilling,
air submersible hammer drilling, pipe following drilling,
high-pressure rotary spray construction, and other drilling process
methods.
Feature:
1. The shell: the installation of the shell shape not only makes
the machine more scientific but also protects the key hydraulic
parts from pollution.
2. Outriggers: not only to protect the cylinder from damage but
also to enhance the support strength.
3. Console: split console, make the operation simpler, to avoid
misuse. The console can swing and rotate, and the distance from the
orifice can be adjusted to facilitate the observation of the
orifice.
4. Track: longer and stronger track, effectively preventing
sagging, to adapt to a wider range of strata.
5. Lifting: Adjustable orifice height no longer depends on the
level of the face.
6. Automatic turntable: eliminating manual labor, it is easier and
more convenient.
7. Through-hole high-pressure faucet: the necessary equipment to
expand the head construction.
8. Power head: The GM-6A Multifunctional Engineering Drilling Rig machine gyrator is driven by a double hydraulic motor, with higher
output torque and a lower swing center than similar products, which
greatly improves the balance of the drilling rig drilling.
Expansion joints are configured to greatly extend the drill pipe
thread life. The sliding mode of the power head is a roller, the
drilling angle is stable and the maintenance cost is low. Modular
design, the whole machine reserved spare hydraulic system position,
convenient later upgrade to change the top driving head, realize
top drive construction.
9. Cooling system: According to the customer's special conditions,
the cooling system is optimized to ensure that the hydraulic system
when the outdoor temperature is 45 °C, the maximum temperature does
not exceed 70 °C.
Optional Parts:
1. GM-6A Multifunctional Engineering Drilling Rig can be equipped
with high power and high flow XTB series foundation strengthening
pump and automatic mixer.
2. Wireless transmission and diesel power units are optional to
monitor and control the equipment on the drilling rig.
Note: The user can choose diesel engine power, electric motor
power, or diesel engine power/motor dual power.
Application:
GM-6A Multifunctional Engineering Drilling Rig can be widely used in the following engineering fields: tunnel
pipe shed support, over-advance forecast, deep foundation pit
anchorage, open quarry shell hole, anti-floating anchorage, ground
source heat pump hole, hydrological water well, and geological
disaster management.
Technical Data:
| Mode | GM-6A |
| Motor | Motor 55kW | Diesel 55kW |
| Weight | 7.5t |
| Size | 5000mm×2200mm×2300mm |
| Speed | 1.5km/h |
| Climbing Capacity | 20° |
| Diameter Pile |
| Max Diameter | Max 2.2m |
| Max Depth | 200m |
| Power Head |
| Feeding Stroke | 3.4m |
| Feeding Force | 35kN |
| Rotation Speed | Low 0—60r/min |
| High 0-120r/min |
| Lifting Power | 65KN |
| Torque | 4000N.m-8000N.m |
| Borehole |
| Depth | 50～200m |
| Diameter | Φ50-Φ200mm |
| Drill pipe (diameter x length) | (Φ50,Φ89)x3000mm |
| Horizontal Hole Height | High 3100mm | Low 2100mm |
| Column |
| Sliding Stroke | 900mm |
| Pitch Angle | 90°~ -10° |
| Swing Angle | ±25° |
Product Packing:
Company Profile:
Shannxi Xitan Geological Equipment Co., Ltd was established in 1958
as a specialized drilling rig manufacturer for more than 60 years.
High-pressure jet grouting rigs, multifunctional engineering
drilling rigs, anchor drilling rigs, and environmental drill rigs
are our featured products with advanced technology, and other
grouting equipment such as grouting pumps, and auto grout mixing
stations are low energy consumption, environmental protection, and
cost-effective. We are a High-pressure Jet Grouting Engineering
Technology Center and National High-tec Enterprise in ancient
City-Xi'an. The factory area is 23,000 m2. 300 million yuan production capacity per year can be reached. 150
million yuan has been invested in production line building and
technological innovation.
Factory Show:
RFQ:
1. Are you the manufacturer?
Ans: Yes, we are a factory with more than 60years of manufacturing
experience.
2. What are your terms of payment?
Ans: 50% deposit prepaid by T/T, and 50% before delivery. We'll
show you the photos of the products and packages before you pay the
balance.
3. How about your delivery time?
Ans: Common drilling rig have in stock, could delivery in one week
after get your full payment.
Customize drilling rig will take 15-45 days after receiving your
advance payment. The specific delivery depends on the items and the
quantity of your order.
4. What is the warranty of our machine?
Ans: Our main machine enjoys one year warranty. But unreasonable
operation and wearing parts exclude.
5. Do you test all your goods before delivery?
Ans: Yes, we have 100% test before delivery. And we will attach our
inspection report for every machine.
6. Do you have after-service?
Ans: Yes, we have a special after-sales service team that will
supply you with professional guidance. And we provide videos for
machine installation and operation.
If you need, we can send our engineers to your worksite and provide
the training for your staff.
